Bambu Smooth PEI Plate - X1C | P1S | P2S | A1
- Regular price
- RM 199.00
- Sale price
- RM 199.00
- Regular price
-
RM 0.00
Worldwide shipping
Secure payments
Authentic products
Share
✅ READY STOCK — SUBANG JAYA — FREE PARKING
🚀 Efficient 24 hours Shipping
🕒 Operating Hours : Mon-Fri 9am-6pm, Saturday 9am-2pm, Closed on Sunday.
📦 Self-pickup & delivery via Lalamove / Grab available
🚚 Note: "Seller's Own Fleet" = Self-collection only
♻️ RECYCLING PROGRAM
✅ Send your empty spools and box back to us and enjoy rebates for your purchase.
H2D | H2S : FAP026
X1 | P1 : FAP010
A1 Mini : FAP008
P2S : FAP034
🧵 KEY FEATURES
⚠️ CONSIDERATIONS & LIMITATIONS
▪ Please note that with the Smooth PEI Plate on the A1 there is a higher risk the plate curling from the corners, or the printed models to detach from the plate. This is caused by the thicker Smooth PEI applied to the plate, which will increase the distance from the bed magnets and lower the magnetic attraction.
▪ If bubbles appear on the bottom of the sheet, heating it on the heatbed at a temperature of no less than 80 degrees for several hours can be helpful in eliminating the bubbles.
▪ Deposition of dust and grease on the build plate decrease adhesion. It is recommended to regularly clean the surface with detergent and water to to maintain best adhesion.
▪ Do not clean the Smooth PEI with Acetone, as it will damage the PEI surface.
▪ Always wait for a few minutes before removing printed models to allow the plate to cool down for easy print removal. This prevents damage to the plate and ensures a long lifetime of the product.
▪ Carefully sanding the surface with fine-grit (600 was recommended) sandpaper can help restore adhesion.
▪ The Smooth PEI plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.
📞 CONTACT US:
O11-54289226 (Shopee Chat / Call / WhatsApp)
📍 SUBANG SHOWROOM | WAREHOUSE (Free Parking)
ARTISAN3D SDN. BHD.
2nd Floor, Lot 839B, Jalan Subang 7,
🚀 Efficient 24 hours Shipping
🕒 Operating Hours : Mon-Fri 9am-6pm, Saturday 9am-2pm, Closed on Sunday.
📦 Self-pickup & delivery via Lalamove / Grab available
🚚 Note: "Seller's Own Fleet" = Self-collection only
♻️ RECYCLING PROGRAM
✅ Send your empty spools and box back to us and enjoy rebates for your purchase.
H2D | H2S : FAP026
X1 | P1 : FAP010
A1 Mini : FAP008
P2S : FAP034
🧵 KEY FEATURES
⚠️ CONSIDERATIONS & LIMITATIONS
▪ Please note that with the Smooth PEI Plate on the A1 there is a higher risk the plate curling from the corners, or the printed models to detach from the plate. This is caused by the thicker Smooth PEI applied to the plate, which will increase the distance from the bed magnets and lower the magnetic attraction.
▪ If bubbles appear on the bottom of the sheet, heating it on the heatbed at a temperature of no less than 80 degrees for several hours can be helpful in eliminating the bubbles.
▪ Deposition of dust and grease on the build plate decrease adhesion. It is recommended to regularly clean the surface with detergent and water to to maintain best adhesion.
▪ Do not clean the Smooth PEI with Acetone, as it will damage the PEI surface.
▪ Always wait for a few minutes before removing printed models to allow the plate to cool down for easy print removal. This prevents damage to the plate and ensures a long lifetime of the product.
▪ Carefully sanding the surface with fine-grit (600 was recommended) sandpaper can help restore adhesion.
▪ The Smooth PEI plate is considered a consumable part, which will degrade over time. The warranty will only cover manufacturing defects, not cosmetic damage like scratches, dents, or cracks. Defective sheets upon arrival are the only ones covered by the warranty.
📞 CONTACT US:
O11-54289226 (Shopee Chat / Call / WhatsApp)
📍 SUBANG SHOWROOM | WAREHOUSE (Free Parking)
ARTISAN3D SDN. BHD.
2nd Floor, Lot 839B, Jalan Subang 7,
×